just do it your self its not hard at all, and also its free so your fineShould i shave my head myself or should i go to the hairdressers?
it'll save you money to do it yourself, and there's really nothing to it. As long as you have access to a pair of clippers, I don't see why you should pay to have it done.
do it yourself, or get a friend to do it
Shave it yourself and save the 15 dollars. I have been doing it since I was a freshman in High School it is really pretty easy. After you use clippers to cut off your hair you can eith have a friend put a razor to your head or they sell special razors that are made for shaving your head they are pretty inexpensive.
shave it yourself. i havent gone to the hairdresser in years. its really easy and almost impossible to mess up
do it yourself it's free and it's easy
If its with a set of decent clippers, preferably Wahl for around 拢40 or so and you want it all one grade(all the same length) then u can get away with doing it yourself, as long as someone has a quick check to make sure u got it all. If you want it too different lengths, longer on top for coming over/spiking then best to get it done at the barbers/salon.
Do it youself,it's very simple,just watch for the ';strays'; around the ears/back of neck,ect,you'll probably have to cut those by hand.I'd have a friend/family member around though,just to check you and make sure you didn't miss anything in back and that your ears/neck look clean:-)
First of all if you have never done it before becareful, dont go to a hairdresser though because they do not get very close. Get it as close as you can with a regular razor, something better than a bic tho, then smooth it out with a 3 head.
You may want to check with your doctor to make sure you dont have any skin irritations on your scalp. personally i have psoriasis on my scalp which makes it less than smooth andd difficult to get a clean shave.
Are you shaving your head with a razor or clippers.
If it's clippers do it yourself at home, select your clipper guard and make sure you go over ever bit of your head in differing directions to ensure you have a uniform cut.
If you want it done by a razor and it's the first time, go to a barbers who do head shaves and have it done by them. If you've done it before and it's a trim do it yourself.
If your doing it yourself make sure your hair is cut as short as possible before you start to shave,use a good shaving foam and hot water to lift the hair. Take a first pass over and repeat until smooth. I recommend a mach 3 razor.
Good luck
i would it would save the money and my dad does it his self and it turns out fine all the time :)
Ah yes, one of these questions. Let me give you the options and your choices, and the most important piece of info is the number of times you plan on shaving your head
If
you currently have a head-shaving tool, then I would shave myself.
If
you do not currently have a head-shaving tool, then you need to consider the cost of driving to the store, buying the head-shaving tool, then driving back.
If
this amount is less than the number of times you plan on shaving your head multiplied by the cost of head shaving at the hairdresser's, shave your own head
else
go to the hairdressers
No comments:
Post a Comment